To manually turn on the stop/start system, Electric parking brake (epb) – Chrysler 2015 200 - User Guide User Manual

Page 62

Advertising
background image

To Manually Turn On The Stop/Start System

Press the STOP/START Off switch (located on the switch bank). The light on the switch will turn off.
For complete details on the Stop/Start System refer to the “Stop/Start System” in the “Starting

and Operating” section located in your Owner’s Manual on the DVD for further information.

ELECTRIC PARKING BRAKE (EPB)

Your vehicle is equipped with an Electric Parking Brake System (EPB) that offers simple

operation, and some additional features that make the parking brake more convenient and useful.

The parking brake switch is located in the center console.
To engage the parking brake manually, pull up

on the switch momentarily.
To release the parking brake manually, the igni-

tion switch must be in the ON/RUN position.

Push on the brake pedal, then push the parking

brake switch down momentarily.
The parking brake will disengage automatically

when the ignition switch in the RUN position, the

transmission is in DRIVE or REVERSE, the driver

seat belt is buckled, and an attempt is made to

drive away by pressing the accelerator pedal.
NOTE:
• You may hear a slight whirring sound from

the back of the vehicle while the parking

brake engages or disengages.

• Once the parking brake is fully engaged, the BRAKE warning lamp in the instrument cluster

and the LED indicator on the switch will illuminate. Once the parking brake is fully disengaged,

the BRAKE warning lamp in the instrument cluster and the LED indicator on the switch will

extinguish.

• If your foot is on the brake pedal while you are engaging or disengaging the parking brake, you

may notice a small amount of brake pedal movement.

• The parking brake can be engaged even when the ignition switch is OFF, however, it can only

be disengaged when the ignition switch is in the ON/RUN position.

• The EPB fault lamp will illuminate if the EPB switch is held for longer than 20 seconds in either

the released or applied position. The light will extinguish upon releasing the switch.

• Refer to the “Starting and Operating” section of your vehicle’s Owner’s Manual on the DVD

for further details.

Parking Brake Switch

O P E R A T I N G YO U R V E H I C L E

60

Advertising