Using homelink, Power inverter – Chrysler 2015 200 - User Guide User Manual

Page 161

Advertising
background image

Using HomeLink®

To operate, push and release the programmed HomeLink® button. Activation will now occur for

the programmed device (i.e., garage door opener, gate operator, security system, entry door

lock, home/office lighting, etc.,). The hand-held transmitter of the device may also be used at

any time.

WARNING!

• Your motorized door or gate will open and close while you are programming the universal

transceiver. Do not program the transceiver if people or pets are in the path of the door or

gate.

• Do not run your vehicle in a closed garage or confined area while programming the

transceiver. Exhaust gas from your vehicle contains Carbon Monoxide (CO) which is

odorless and colorless. Carbon Monoxide is poisonous when inhaled and can cause you

and others to be severely injured or killed.

POWER INVERTER

There is a 115 Volt, 150 Watt power inverter

outlet located on the back of the center con-

sole. This outlet can power cellular phones,

electronics and other low power devices requir-

ing power up to 150 Watts.
NOTE:

The power inverter is designed with built-in

overload protection. If the power rating of 150

Watts is exceeded, the power inverter will au-

tomatically shut down. Once the electrical de-

vice has been removed from the outlet, the inverter should automatically reset. If the power rating

exceeds approximately 170 Watts, the power inverter may have to be reset manually. To reset the

inverter manually, unplug the device and plug it in again. To avoid overloading the circuit, check

the power ratings on electrical devices prior to using the inverter.

WARNING!

To Avoid Serious Injury or Death DO NOT:

• insert any objects into the receptacles

• touch with wet hands

Close the lid when not in use. If this outlet is mishandled, it may cause an electric shock and

failure.

Power Inverter

E L E C T R O N I C S

159

Advertising