Maintaining your vehicle, Opening the hood – Chrysler 2015 200 - User Guide User Manual
Page 191
Advertising
OPENING THE HOOD
To open the hood, two levers must be released:
1. Pull the hood release lever located under the
driver side of the instrument panel.
2. Move to the front of the vehicle.
3. Reach under the center front edge of the
hood and push and hold the safety latch
lever to the right.
4. Lift the hood upward to the open position.
WARNING!
Be sure the hood is fully latched before driving your vehicle. If the hood is not fully latched, it
could open when the vehicle is in motion and block your vision. Failure to follow this warning
could result in serious injury or death.
Release Lever
Safety Latch Lever Location
Safety Latch Lever
M A I N TA I N I N G YO U R V E H I C L E
189
Advertising