CLEAR 4G+ Personal Hotspot Users Guide - Manual (Page 31)

30
Manage your CLEAR Spot (continued)
CLEAR Spot Home Page / Advanced Settings / WAN / 3G
This window displays information about CLEAR Spot’s 3G connection status.
 Connection Status: Indicates whether or not the CLEAR Spot is connected to 3G.
 Service Type: Displays the type of 3G coverage available.
o Coverage Type: Displays the 3G coverage type.
o RSSI: Reflects the signal strength of the network.
o Ec/lo: Is a dimension ratio of the average power of a channel (typically the pilot channel)
to the total signal power.
 MDN: Mobile Directory Number, a 10-digit phone number, assigned to the CLEAR Spot.
 SID: The System ID identifies your home network area.
 MSID: Mobile Station ID is used as an identifier on the network.
 NAI: Network Access Identifier, is used for accessing the 3G network.
 PRL Version: The PRL (Preferred Roaming List) is set by Clearwire and controls the radio
channels and network carriers used by the CLEAR Spot.
 Load 3G PRL: Update the 3G PRL.
 Upload: Upload the 3G PRL data.
Note: To change any settings, you must be logged in to the CLEAR Spot Home Page
.
Note: The Advanced Settings link appears on every window of the CLEAR Spot Home Page.
If you’re using your CLEAR
Spot and are connected to
the internet, click here to
open the CLEAR Spot
Home Page.