CLEAR 4G+ Personal Hotspot Users Guide - Manual (Page 32)

31
Manage your CLEAR Spot (continued)
CLEAR Spot Home Page / Advanced Settings / WAN / 4G
This window displays information about the CLEAR Spot’s 4G WAN connection status.
 Connection Status: Indicates whether or not the CLEAR Spot is connected to 4G.
 Service Type: Displays the type of 4G coverage available as well as other information.
o RSSI: Reflects the signal strength of the network.
o CINR: CINR stands for Carrier to Interference-plus-Noise Ratio, and is a measurement of
the signal effectiveness.
 Tx Power: Transmitter power – a higher number is better.
 Center Frequency: Frequency of the 4G channel used for data connection / transfer.
 NSP-ID: 4G Network Service Provider ID.
 NAP-ID: 4G Network Access Provider ID.
 BSID: Base Station ID.
 Preamble: Preamble ID of the current base station to which the CLEAR Spot is connected.
 Realm: Login address used for 4G service.
 Certificate Information: Displays CLEAR Spot security information.
Note: To change any settings, you must be logged in to the CLEAR Spot Home Page
.
Note: The Advanced Settings link appears on every window of the CLEAR Spot Home Page.
If you’re using your CLEAR
Spot and are connected to the
internet, click here to open the
CLEAR Spot Home Page.