Clear, Dvanced, Ettings – CLEAR 4G+ Personal Hotspot Users Guide User Manual
Page 34: Etwork, Continued, Manage your clear spot (continued)
33
Manage your CLEAR Spot (continued)
CLEAR Spot Home Page / Advanced Settings / Wi-Fi / Network (continued)
Basic Rate: Type of wireless devices connected to your network. If you’re certain that all of the
wi-fi devices used with your device support 802.11g, then select 802.11g only (this ensures faster
Wi-Fi speeds); otherwise, select 802.11b/g compatibility.
RTS Threshold: Specifies the smallest packet size, in bytes, for which RTS/CTS (Request to
Send/Clear to Send) handshaking is used. The recommended value is 2347. Change this value
only if you’re experiencing inconsistent data flow. Make only minor changes to this value.
Fragmentation Threshold: Specifies the largest allowable size, in bytes, for a packet. If a
packet is larger than the threshold amount, the packet is fragmented into multiple packets before it
is transmitted. To prevent poor network performance, it is recommended to keep this value as
large as possible (up to 2345).
Note: to change any settings, you must be logged in to the CLEAR Spot Home Page.
When you’re ready to set your wi-fi network settings, click “Save”.
If you don’t desire to make any changes, click “Cancel” and you’ll see the CLEAR Spot Home Page.
Note: The Advanced Settings Tab appears on every window of the CLEAR Spot Home Page.
List of connected devices: Opens a window that shows devices that are connected to the Clear
Spot. You’ll see the MAC Address, the device name, and the IP Address of the connected device.
.