How to configure com port properties – Comtrol Rocket Port User Manual
Page 26
30 - How to Configure COM Port Properties
RocketPort Series/RocketModem IV Driver User Guide: 2000564 Rev. A
Device Driver Configuration
How to Configure
COM Port
Properties
To change a port’s properties for a product, highlight the port of the product that
you want to configure in the Tree View pane. Make any necessary changes:
•
Click Apply to save the changes, which saves the changes and leaves the
Comtrol Drivers Management Console open.
•
Click Ok to save the changes and close the Comtrol Drivers Management
Console.
•
Click Cancel to undo the changes and close the Comtrol Drivers Management
Console.
If you click another port or device name without saving the changes, the Comtrol
Drivers Management Console will prompt you to Apply, Ignore, or Cancel the
changes.
For more information, see
Configuring COM Port Properties
After saving the port changes, if desired, you can click Apply These Settings to All
Ports to populate the remaining ports with these COM properties.