Comtrol Rocket Port - Manual (Page 31)

RocketPort Series/RocketModem IV Driver User Guide: 2000564 Rev. A Configuring COM Port Properties - 35
Device Driver Configuration
4. RocketPort EXPRESS/INFINITY, select the appropriate communications
mode.
5. Enable the features that you want to use.
Note: You can use the “What’s this?” help or refer to the following table for
information about each option.
6. RocketPort EXPRESS/INFINITY, select the Use Fast (Low Latency) Data
Transfer option when receiving or sending small blocks of data.
7. Optionally, click the RTS Toggle Options button:
• If your communications application does not toggle FTS when transmitting
in RS-485 mode.
• If you are using an
external RS-232 to
RS-485 converter,
which is attached to
a port that is
configured for RS-
232.
a. Click the
appropriate options
for your
environment.
b. Click OK to save
the changes and
return to the port
General tab.
8. If desired, click the Clone check box to set all of the ports on this Comtrol
device to these characteristics.
9. Optionally, change the User-Friendly Port Name.
10. If desired, select a different COM Name (COM port number). The drop-down
list displays (in use) next to COM port numbers that are already in use in this
system. Do not duplicate COM port numbers as this will cause the ports to not
function.
RocketPort EXPRESS/INFINITY Port General Tab