Comtrol Rocket Port - Manual (Page 45)

RocketPort Series/RocketModem IV Driver User Guide: 2000564 Rev. A Using Configuration Files - 51
Using Configuration Files
The Comtrol Drivers Management Console supports saving configuration files,
which provides:
• Back-up for existing configurations
• Ability to configure multiple of the same devices with the same configuration
parameters
Note: Configuration files must be for the same model with the same port density.
For example, you cannot load a RocketPort EXPRESS configuration file
onto a RocketPort EXPRESS SMPTE or a configuration file for a 32-port
RocketPort INFINITY onto a 4-port RocketPort INFINITY.
Configuration files are saved with a .DCF extension.
Saving Configuration Files
Use the following procedure to create and save a configuration file.
1. After configuring the device and ports, click Save Configuration.
2. Optionally, change the default file name and click Save.
Loading a Configuration File
Use the following procedure to load a configuration file for your device. You must
have previously saved a configuration file before you can load a configuration file.
1. In the left pane, click the device that you want to load the configuration file
upon.
2. Click Load Configuration.
3. Browse to the location of the configuration file that you want to load.
4. Highlight the configuration file and click Open.
The configuration file will load in a few moments.