Ecler TP-NET - Manual (Page 11)

11
NZA MULTICHANNEL AMPLIFIER SERIES
TYPE PARAM1 PARAM2 PARAM3 PARAM4 DESCRIPTION
SET POWER ON/OFF Sets the Device Power status
PRESET <Preset Number> Sets the current PRESET
OLEVEL <Output Channel> <Level> Sets the current LEVEL of an Output
Channel
OMUTE <Output Channel> YES/NO Sets the current MUTE status of an
Output Channel
SUBSCRIBE ALL Subscribes to all VU-meters
OVU <Output Channel> Subscribes to an Output Channel VU-
meter
UNSUBSCRIBE ALL Unsubscribe to all VU-meters
OVU <Output Channel> Unsubscribe to an Output Channel VU-
meter
DATA POWER ON/OFF Shows the Device Power status
PRESET <Preset Number> Shows the current PRESET
OLEVEL <Output Channel> <Level> Shows the current LEVEL of an Output
Channel
OMUTE <Output Channel> YES/NO Shows the current MUTE status of an
Output Channel
OVU <Output Channel> <Pre Vumeter Level> <Post Vumeter Level> Shows the VU-meter value of an
Output Channel
ALARM_PROTECT <Output Channel> ON/OFF Shows the Protect alarm status of an
Output Channel
INFO_NAME “<Device Name>” Shows the Device Name
INFO_MODEL <Device Model> Shows the Device Model
INFO_VERSION <Firmware Version> Shows the Firmware Version
INFO_MAC <Device MAC
address>
Shows the Device MAC address
ERROR <Error ID> “<Error Description>” Informs about an error