Ecler TP-NET User Manual
Page 9
9
OVU
<Output Channel>
<Pre Vumeter Level> <Post Vumeter Level>
Shows the VU-meter value of an
Output Channel
ALARM_PROTECT <Output Channel>
ON/OFF
Shows the Protect alarm status of an
Output Channel
ALARM_FAULT <Output
Channel> ON/OFF
Shows the self-diagnosis system alarm
status of an Output Channel
INFO_NAME
“<Device Name>”
Shows the Device Name
INFO_MODEL
<Device Model>
Shows the Device Model
INFO_VERSION
<Firmware Version>
Shows the Firmware Version
INFO_MAC <Device
MAC
address>
Shows the Device MAC address
ERROR
<Error ID>
“<Error Description>”
Informs about an error
Note:
INC
and
DEC
commands are replied with a
DATA
command from the device with the resulting LEVEL value, after it has been increased or decreased.
When the
INC
or
DEC
command tries to adjust a LEVEL value beyond its minimum or maximum limits, no reply (
DATA
command) will be produced.