Npa stereo amplifier series – Ecler TP-NET User Manual
Page 12
12
NPA
STEREO AMPLIFIER SERIES
TYPE PARAM1 PARAM2
PARAM3 PARAM4
DESCRIPTION
SYSTEM
CONNECT
[PINGPONG]
Saves the client IP address for responses and then
dumps current device status (with DATA messages)
DISCONNECT
Cancel subscriptions and terminates
communication
SUBSCRIPTION_RATE <Rate>
Alive message from device
PING
Alive message from device
PONG
Alice ACK message from client
GET
ALL
Dumps current device status (with DATA
messages)
POWER
Gets the Device Power status
PRESET
Gets the current PRESET
OLEVEL
<Output Channel>
Gets the current LEVEL of an Output Channel
OMUTE
<Output Channel>
Gets the current MUTE status of an Output Channel
OVU
<Output Channel>
Gets the VU-meter value of an Output Channel
ALARM_PROTECT
<Output Channel>
Gets the Protect alarm status of an Output Channel
ALARM_THERMAL
<Output Channel>
Gets the Thermal alarm status of an Output
Channel
ALARM_LOAD
<Output Channel>
Gets the Load alarm status of an Output Channel
ALARM_VOLTAGE
Gets the Voltage alarm status of the Device
INFO_NAME
Gets the Device Name
INFO_MODEL
Gets the Device Model
INFO_VERSION
Gets the Firmware Version
INFO_MAC
Gets the Device MAC address