Mimo88 digital matrix – Ecler TP-NET User Manual
Page 15
15
MIMO88
DIGITAL MATRIX
TYPE PARAM1 PARAM2
PARAM3 PARAM4
DESCRIPTION
SET
PRESET
<Preset Number>
Sets the current PRESET
ILEVEL
<Input Channel>
<Level>
Sets the current LEVEL of an Input Channel
OLEVEL
<Output Channel>
<Level>
Sets the current LEVEL of an Output Channel
XLEVEL
<Input Channel>
<Output Channel> <Level>
Sets the current LEVEL for a Matrix point
IMUTE
<Input Channel>
YES/NO
Sets the current MUTE status of an Input Channel
OMUTE
<Output Channel>
YES/NO
Sets the current MUTE status of an Output Channel
XMUTE
<Input Channel>
<Output Channel> YES/NO
Sets the current MUTE status for a Matrix Point
GPO
<Output>
<GPO Value>
Sets the current value for a General Purpose Output
INC
ILEVEL
<Input Channel >
<Value>
Increases the current LEVEL of an Input Channel by
Value (Value can range from ±1 to ±100)
OLEVEL <Output
Channel>
<Value>
Increases
the current LEVEL of an Output Channel
by Value (Value can range from ±1 to ±100)
XLEVEL
<Input Channel>
<Output Channel> <Value>
Increases the current LEVEL of a Matrix point by
Value (Value can range from ±1 to ±100)
DEC
ILEVEL
<Input Channel >
<Value>
Decreases the current LEVEL of an Input Channel
by Value (Value can range from ±1 to ±100)
OLEVEL <Output
Channel>
<Value>
Decreases
the current LEVEL of an Output Channel
by Value (Value can range from ±1 to ±100)
XLEVEL
<Input Channel>
<Output Channel> <Value>
Decreases the current LEVEL of a Matrix point by
Value (Value can range from ±1 to ±100)
SUBSCRIBE
ALL
Subscribes to all VU-meters
IVU
<Input Channel>
Subscribes to an Input Channel VU-meter
OVU <Output
Channel>
Subscribes to an Output Channel VU-meter
UNSUBSCRIBE
ALL
Unsubscribe to all VU-meters
IVU
<Input Channel>
Unsubscribe to an Input Channel VU-meter
OVU <Output
Channel>
Unsubscribe to an Output Channel VU-meter
Note:
INC
and
DEC
commands are replied with a
DATA
command from the device with the resulting LEVEL value, after it has been increased or decreased.
When the
INC
or
DEC
command tries to adjust a LEVEL value beyond its minimum or maximum limits, no reply (
DATA
command) will be produced.