EcoTech Marine Full EcoSmart - Manual (Page 21)

General Operational Modes
Constant Speed Mode
In Constant Speed Mode (indicated by a green LED on
the knob) the pump runs continuously at a constant speed
which can be user-set. When in constant mode, slave
pumps will only sync with the master pump, there is no anti-
sync. When you change speed, the speed of the pump will
be represented by the LED bar. To navigate to the mode,
press the mode button until the control dial turns green. You
can then adjust the speed of the mode using the control
dial. The speed will be indicated by the blue LED light strip.
Illustration to the right shows an EcoSmart driver in Con-
stand Speed Mode with the speed set to just over 50% of
max speed.
Random Modes
Random mode operates in two different settings, Lagoonal and Reefcrest. These random modes
are used to simulate natural reef environments. To navigate to each of these modes, press mode
until the control dial turns yellow. Then press set to switch between Reefcrest Random and La-
goonal Random. The specific Random mode you are in will be indicated by a pair of two blue
LED lights brightly illuminated. The speed of these modes will be indicated by dim LED lights. The
graph below represents a portion of what each mode’s speed for a duration of time.
Operational Modes
21
Lagoonal
Reef Crest
Section 4.2