EcoTech Marine Full EcoSmart - Manual (Page 31)

Operational Modes
31
Feed Mode Time:
Setting 1: 5 minutes
Setting 2: 10 minutes **Default Setting
Setting 3: 15 minutes
Setting 4: 20 minutes
Setting 5: 30 minutes
Setting 6: 60 minutes
Auto-Dim Time:
Setting 1: Auto-Dim after 1 minute of inactivity
Setting 2: Auto-Dim after 10 minutes of inactivity
Setting 3: Auto-Dim after 60 minutes of inactivity
Setting 4: Disabled **Default Setting
Driver shown here in Feed Mode Time Configuration Mode
Setting, showing that it is set to the 5 minutes and default
being 10 minutes.
Driver shown here in Auto-Dim Time Configuration Mode
Setting, showing that it is set to 1 minute and default being
disabled.
Once you have selected the new value for the current setting, press and hold the set button until
the two leds on the led bar indicating the new value flash repeatedly. The value is now saved and
you are back to the configuration main menu with the next setting in progression will illuminate.
To exit configuration mode at any time in this entire process press the option button. Values are
not saved until you press and hold the set button and the value blinks repeatedly, if you press op-
tion to exit before that step, the value will not be saved.
Example:
Example:
Section 4.5