EcoTech Marine Full EcoSmart - Manual (Page 28)

Operational Modes
28
Configuration Mode
Configuration Mode is used to define settings for the following: Battery Backup speed, Night Mode
speed and time, Feed Mode speed and time and Auto-Dim time. These modes operate automati-
cally depending on the settings that you define.
The Configuration Menu is entered by pressing and holding all three buttons during any normal
operational mode. At this point the control dial led will blink orange and white and the first two blue
LED lights will illuminate brightly. You are now in the configuration menu and can navigate between
the following six different configuration settings:
Battery Backup Speed
Feed Mode Speed
Night Mode Speed Feed Mode Time
Night Mode Time Auto-Dim Time
In the configuration mode main menu, each of the six different settings will be indicated by a cor-
responding pair of illuminated blue LED lights. Use the mode button to cycle through the different
configurable settings. Illustration above shows the driver in the configuration mode main menu sit-
ting on Night Mode Speed (3rd and 4th Blue LEDs Illuminated).
Once the mode you want to modify is signaled by the LED bar, you can press the set button to ac-
cess that modes values, at this point the control dial will blink a set of colors specific for each mode
you are modifying. These colors are:
• Battery Backup Speed: Orange and Blue
• Night Mode Speed: Orange and Green
• Night Mode Time: Orange and Purple
• Feed Mode Speed: Orange and Pink
• Feed Mode Time: Orange and Yellow
• Auto-dim functionality: Orange and Turquoise
Illustration above shows the driver in the Night Mode Speed configuration setting. It also is show-
ing, by the illuminated LEDs, what setting it is currently set to. The driver will also indicate, by
the dim LEDs, what setting is the default. Note: If there is only two brightly illuminated LEDs, that
means that you are currently set to the defualt setting.
Driver shown in Configuration Mode Main
Menu, sitting on Night Mode Speed option.
Driver shown in Night Mode Speed Configura-
tion set to lowest speed and showing default
speed is setting 3.
Section 4.5