Maintenance – EcoTech Marine Full EcoSmart User Manual
Page 37
Maintenance
37
The upgrade process is started process takes approximately two and one half minutes. The up-
grade is still in progress while the latest driver flashes red/green/red/blue quickly and the older
driver flashes blue and white quickly. The process is complete when both drivers flash one of the
following colors to indicate the outcome of the upgrade.
The firmware revision on your driver can be determined by pressing and holding option/power but-
ton when turning your EcoSmart Driver on:
This example would be the startup sequence for Firmware Revision 1.3 (One Green Blink, 3 Blue
Blinks)
Section 6.2
Upgrade Completed Successfully: Both Drivers now have th same Firmware.
Upgrade Failed: Communication Error. Retry Firmware Upgrade Process. If it
fails again, contact EcoTech Marine Support for further assistance.