EcoTech Marine Full EcoSmart - Manual (Page 29)

Operational Modes
29
At this point, you can press the set button to cycle through the different values that the current set-
ting can be saved to. Use the following table to help determine the setting values indicated by the
brightly illuminated LEDs a night. The Settings are:
Driver shown here in Battery Backup Speed Configuration
Mode Setting, showing that it is set to the lowest speed of
pump and default being 20% speed of pump.
Battery Backup Speed:
Setting 1: Lowest Speed of pump
Setting 2: 10% speed of pump
Setting 3: 20% speed of pump **Default Setting
Setting 4: 30% speed of pump
Setting 5: 40% speed of pump
Setting 6: 50% speed of pump
Night Mode Speed:
Setting 1: Lowest Speed of pump
Setting 2: 25% speed of pump
Setting 3: 50% speed of pump **Default Setting
Setting 4: 75% speed of pump
Driver shown here in Night Mode Speed Configuration
Mode Setting, showing that it is set to the lowest speed of
pump and default being 50% speed of pump.
Example:
Example:
Section 4.5