Futaba 9VHP - Manual (Page 21)

MODEL SELECT
Model Select Functions
1) Settings and data for up to 6 different models
can be stored independently in the transmitter
memory.
2) Any one of the 6 programs (models) can be
selected for use when desired.
3) Each model can be given a name of up to 8
characters using the NAME function (See
page 49).
4) After the Trim Memory function has been
performed, the trim positions for each model
can be read by selecting the desired model
and setting each trimmer to the center posi-
tion. Then the best setting for up to six
models can be re-read.
Setting Method
1) Select the EDIT screen and move the cursor
to Line 2 with the cursor key,
played. To execute the selection, press the
program key. When the program
and display the MODEL SELECT screen by
pressing the
program key. The position
of the cursor will then indicate the model cur-
rently selected.
key is pressed, the model number and name at
the top right corner of the screen change to
show the new selection.
In the example shown, the message asks if
model No. 5 is to be selected. To select Model 2) Select the desired model number with the
cursor keys and
press the program key. A message asking
No. 5, the soft key is pressed. To remain
with Model No. 1, the program key is
if the selection is to be executed will be dis- pressed.
[47]