Futaba 9VHP User Manual
Page 23
Move the cursor to Line 3 of the EDIT screen with the
cursor key.
NAME
A model name of up to 8 characters and a user
name of up to 10 characters can be input. The
user name has a security feature. Once a four-
digit ID number is input, the user name cannot
be changed unless the same ID code in input
first (The ID code does not appear on the screen
after the initial input).
The model name and user name are initially set
to T9VHP and FUTABA, respectively.
The model name and user name are displayed at
the top right and left corners of the screen. The
user name is displayed on the standard screen
only.
NOTE: CODE number 0000 is an open code
and the user name can be changed. For
example, if 1234 is set as your personal
ID code number, it is memorized, to-
gether with your name, and the user
name cannot be changed if the code
number 1234 is not input first.
DO NOT FORGET YOUR CODE NUM-
BER!!!
Setting Method
1) Select the EDIT screen and move the cursor
to Line 3 with the
cursor key, then dis-
play the NAME screen by pressing the
program key.
3) To input the model name, select each charac-
ter as in Step 2 and press the
program
key. The character will then appear above the
underline and the underline will automatically
move to the next space.
4) Up to 8 characters can be input by repeating
steps 2) and 3). At the completion of the
model name, press the
program key.
5) To input your personal ID Code, move the
lower cursor and the underline to the CODE
position with the program
key
and repeat Steps 2) and 3) to input the
characters. Up to four characters can be input.
When all code characters are input, press the
key.
6) Next, move the cursor to the USER input
position with the
program key,
and a user name of up to 10 characters can be
input (Steps 2 and 3). At the completion of
the user name input, press the
key.
7) When the NAMEscreen is again selected after
the ID code has been set the code will NOT be
displayed. The code and user name cannot be
chanqed unless the original code is re-entered
(Repeat Step 5 including pressing the
key). The ID code and user name can then be
changed. Therefore, do not forget your ID
code.
2) Use the
cursor
keys to move the cursor to each letter or
character to be input.
If you should forget your personal ID code, it can only be reset by a Futaba service center.