Futaba GV-1 - Manual (Page 34)

FUNCTIONS
Governor ON/OFF switch position setting
SWPt This set-up screen sets the direction of operation of the
switch when the governor is turned on and off with the
transmitter switch. The governor on/off input "AUX(on/
off)" connects to a receiver vacant channel.
(Setting direction check)
1
Operate the switch.
The "off" or "on" set direction is displayed
on the LCD screen.
(Changing the direction)
1
Change the direction by pressing the DATA+ or
DATA- key.
(Initial value) Normal mode
Function priority
The "governor ON/OFF switch position set-up" and "mixture trim" func-
tions cannot be enabled simultaneously. Therefore, when the "governor
ON/OFF switch position set-up" function was enabled, always INH the
"mixture trim" function. Moreover, always set the "mixture servo opera-
tion mode" to the "Gov" mode.