Futaba GV-1 - Manual (Page 39)

FUNCTIONS
("Gov" mode)
2
Set the rate with the
DATA+ key (increase) or
DATA- key (decrease).
("Dir" mode)
2
Transfer the mixture
curve data of that point
from the transmitter by
pressing the DATA+ or
DATA- key.
However, to match the mixture
curve data with the transmitter
curve data as final servo output,
match the "ATV" data of the mix-
ture channel set at the transmitter
and the governor side "mixture
ATV" data and servo reverse
function.
(Setting range) 0~100%
(Initial value) MD1:15% MD2:36% MD3:50% MD4:58% MD5:64%
MD6:68% MD7:73% MD8:76% MD9:80%