Futaba GV-1 - Manual (Page 42)

FUNCTIONS
Battery fail safe B/FS
The battery fail safe function can be activated and inhibited.
"INH" inhibits the battery fail safe function and "ACT" activates the battery
safe function. When activating the battery fail safe function, set the servo
position with the "battery fail safe position" function.
(Setting method)
1
Set the mode by pressing the
DATA+ or DATA- key.
(Initial value) INH
Battery fail safe position B/FD
This function sets the throttle position during battery fail safe operation.
When the battery voltage drops to 3.8V, the system enters the battery fail safe
mode. Moving the throttle stick to the maximum slow position after battery
fail safe operation temporarily resets the battery fail safe function. However,
30 seconds later, the system enters the battery fail safe mode again. Once the
system enters the battery fail safe mode, this operation continues until the
power is turned off.
(Setting method)
1
Move the throttle stick to the de-
sired position and memorize the
throttle position at battery fail safe
operation by pressing the DATA+
or DATA- key.
(Initial value) 20%
(Set point confirmation)
1
When the throttle stick is operated, "*" is displayed
at the set point and the set point can be confirmed.