Cisco XR 12000 Series - Manual (Page 25)

1-13
Cisco XR 12000 Series Router SIP and SPA Hardware Installation Guide
OL-17438-04
Chapter 1 Overview: Cisco XR 12000 Series Router SPA Interface Processors
Cisco XR 12000 SIP-501 Overview
The Cisco XR 12000 SIP-501 LEDs are described in Table 1-10 .
Cisco XR 12000 SIP-501 Physical Specifications
The Cisco XR 12000 SIP-501 physical specifications are shown in the following table.
SPA Subslot Numbering on the Cisco XR 12000 SIP-501
The Cisco XR 12000 SIP-501 accepts up to 4 single-width SPAs or 1 dual-width SPA.
Figure 1-11 shows a Cisco XR 12000 SIP-501 with 2 SPAs installed. The left SPA slot is subslot 0 and
the right SPA slot is subslot 1. If one dual-width SPA is installed, it is recognized as being in subslot 0.
Figure 1-11 Subslot Locations for the 1-Port 10-Gigabit Ethernet SPA
1 SPA subslot 0 4 SPA subslot 3
2 SPA subslot 1 5 Ejector Levers
3 SPA subslot 2 6 Status LED
Table 1-10 Cisco XR 12000 SIP-501 LEDs
LED Label Color State Meaning
Status Yellow On IOS is loaded and SIP is ready to be enabled.
Green On SIP is active.
Rate Off Off SIP is SIP-401 or SIP-501.
Green On SIP is SIP-601.
Table 1-11 Cisco XR 12000 SIP-501 Physical Specifications
Description Specifications
Physical dimensions Occupies one line card slot on a Cisco 12000 Series Router
Shipping weight 10kg
Operating temperature 32 to 104°F (0 to 40°C)
Relative humidity 10 to 90 percent, noncondensing
Storage temperature –4 to 149°F (–20 to 65°C)
12000-SIP-600
0
116872
STAT US
SPA-1XTENGE-X FP-A
ACT IVE /LIN K
SPA10X1GE-A
ST AT US
4
9
3
8
2
7
1
6
0
5
A/L
A/L
A/L
A/L
A/L
A/L
A/L
A/L
A/L
A/L
1
2