Haltech E6S - Manual (Page 24)

24
These relays should be mounted on the firewall or an inner guard. Do not mount the relays
such that they could catch and collect splashed water. Residual water inside the relay housing
will cause them to fail. Mount them with the tab upwards as shown in the diagram.
1.3.9. Fuse Block Assembly
The fuse block assembly holds the fuses that protect the various components of the Haltech
E6S system.
The fuse block is supplied from the factory with fuses installed. The fuse ratings are shown in
the diagram and should not be changed as these have been selected for best protection.
Altering the fuse ratings could cause severe damage to the E6S system.
The fuse block should be positioned so that it can be easily accessed in case of fuse failure.
Do not mount the fuse block where it could be exposed to water. Mount via the two screws
holes in the block. Ensure that vibration will not cause the screws to vibrate loose.
Connect the Fuse Block assembly to the Main Harness.