3 running the software from the hard disk, Cd \haltech, 4 running the software from the floppy disk – Haltech E6S User Manual

Page 30: 5 azerty keyboards, Qwerty

Advertising
background image



30

destination directory, but it is not recommended that you do unless you understand how
directories work.
When it is finished, the installation programme will tell you if the installation is successful. If
it was not, consult the trouble shooting section of this manual.

The E6S Programme is now ready to run.

2.2.3 Running the Software from the Hard Disk.


Boot your computer up as described earlier. If your computer is already on, make sure the C
drive is currently selected. To change to the HALTECH directory type :

cD \haltech¬


or, if you used a different destination directory, type that path.

To start the programme type :

E6S¬


The E6S programme will now run. The next section is on running the software from a floppy
drive. You can skip this section and go straight to the section entitled Azerty Keyboards.

2.2.4 Running the Software from the Floppy Disk.


To run the software from a floppy drive, boot your computer up as described earlier. Insert the
Programming disk in the disk drive. If the drive is the A drive, then it must be currently
selected. To select the A drive (or B drive if it is the required drive) type :

a:¬

or

B:¬


You should now see the prompt :

A:\>_

or

B:\>_


To start the E6S program type :

E6S¬


The E6S program will now run.

2.2.5 Azerty Keyboards


Most countries use a keyboard where the first six letter keys across the top row are :

qwerty

Advertising