Carrier V2203-DI (26--00128) - Manual (Page 69)

6--2 62--11362
6.2 FUEL SPEED SOLENOID
6.2.1 Solenoid Test
WARNING
The solenoid can become very warm to the
touch when energized for any length in
time.
1. Disconnect the plug from the solenoid connector (2).
2. Remove the solenoid (1) from the engine.
3. Supply power (12VDC) to the solenoid thru terminals
(3) and (4).
4. If the rod in the solenoid (1) moves smoothly (approx-
imately 0.6”), the solenoid is normal, if the rod does
not move, or moves only a fraction of that distance,
replace it.
1. Fuel Speed Solenoid
2. Solenoid Connector
3. Terminal 2 (--)
4. Terminal 1 (+)
A. Actuator Rod (Power Off)
B. Actuator Rod (12VDC
applied)