CFM Corporation ODSHR42 - Manual (Page 21)

21
ODSHR Outdoor Woodburning Fireplace
20002264
Accessory Description Model No.
Extended Round Top
Chimney Sections
Chimney Elbows
Top Housing
with
Upper Baffle
Chimney Reducer Kit
Attic Insulation Shield
For use with Type "11CF" Chimney Sys-
tems.
Used to terminate chimney at top of
chase. Adapter kit included. Flashing not
included.
Used to build "11CF" chimney systems.
Used to develop 30° offset chimney sys-
tems. (Elbows packed 2 per carton - upper
and lower elbow set)
Gives traditional chimney top look using
simulated brick in red, tan or white color.
Brick pattern is embossed into galvanized
steel unit. Roof flashing is included. Appro-
priate adapter is required. Must be used
with upper baffle.
Used to convert CF11 chimney system to
SK8 chimney system.
For outdoor use only in US and Canada.
Used to prevent insulation from coming in
contact with the chimney system. For use
with CF11 pipe.
RLTCF11L
11" flue
11CF1 (1' long)
11CF18 (1¹⁄₂' long)
11CF3 (3' long)
11CF4 (4' long)
11CF30-2
(11" 30° flue)
S20BR/BT/BW
S20UB (Upper Baffle)
20002673
FS2100-HT
Contact the CFM Corporation with questions con-
cerning prices and policies covering replacement
parts. Parts may be ordered through your CFM
Corporation distributor or dealer.
You will need the following information when order-
ing replacement parts:
1. The appliance model number.
2. The serial numbe.
3. A description of the part.
Should you need additional information beyond what
your dealer can furnish, contact:
CFM Corporation
2695 Meadowvale Blvd.
Mississauga, Ontario L5N 8A3
Attn: Technical Services
Firebox Record
Model and serial numbers are listed on the rating plate
(located on right side of combustion chamber).
Record your model and serial numbers here for future
reference:
Model # ______________________________
Serial # _______________________________
Fuel Type: NG ____ LP ____ Wood ____
Date Purchased: ________________________
Dealer: ________________________________
Phone No: _____________________________