Bypassing sensors – Interlogix Simon XT User Manual User Manual

Page 18

Advertising
background image

12

Simon XT User Manual

Close all doors and windows.

Press DOORS +WINDOWS twice. If a code is required for arming, enter your
code after the first press of the DOORS +WINDOWS button, then press the
button again.

The panel displays Doors+ Windows - No Delay and speaks Doors and Windows
On, No Entry Delay. The DOORS + WINDOWS light will blink and the exit delay
will begin.

To avoid causing an alarm, you must disarm the system with a wireless touchpad
before entering your home.

Quick exit

Use the quick exit feature when someone wants to briefly leave while the home is
still armed (for instance to get the newspaper). This feature needs to be enabled
by your installer. When you press the DISARM button, the display shows Exit
Time Is On. This allows a designated exit door to be open for up to two minutes
without triggering an alarm.

The designated door may be opened and closed only once. If you close the
designated door behind you when you exit, you will have to disarm the system
upon reentering. Leave the designated door open while using the quick exit
feature.

Exit delay extension

If enabled by your installer, the Exit delay extension feature will recognize when
you arm the system, leave your house and then quickly re-enter your house
(such as you would if you forgot your car keys.) In such a case Simon XT will
restart your exit delay to give you the full exit delay again.

Bypassing sensors

Bypassing a sensor allows you to open the sensor while the system is armed.
For example, if your Doors & Windows are armed and you want to open your
kitchen window but do not want to disarm the entire system, then you can bypass
the kitchen window sensor and then open the kitchen window without causing an
alarm. Bypassed sensors are automatically unbypassed when the arming level is
changed to a level where the sensor is not active.

Bypassing

1. Press BYPASS and enter the master code.

2. Scroll up/down until you reach the sensor to be bypassed.

3. The display shows, for example, Sn 1 Front Door on the first line.

Advertising