Interlogix Simon XT User Manual - Manual (Page 25)

Simon XT User Manual 19
How your system communicates
Your system responds to you through the use of display and voice messages,
status beeps, alarms, and panel indicator lights.
Status beeps
The panel sounds status beeps to alert you to various system events and
conditions.
Note: You may receive a different number of status beeps if you press the
buttons quickly
Table 8: Status beeps
Activity Beep response
Doors+Windows Exit delay and entry delay beeps sound two times every 5
seconds and two times per second during the last 10 seconds.
If silent exit is used, the exit delay beeps will only sound twice
when you arm and twice when the exit delay expires.
Motions Exit delay and entry delay beeps sound three times every 5
seconds and three times per second during the last 10 seconds.
If silent exit is used, the exit delay beeps will only sound three
times when you arm and three times when the exit delay
expires.
Doors+Windows and Motions Exit delay and entry delay beeps sound four times every 5
seconds and four times per second during the last 10 seconds.
If silent exit is used, the exit delay beeps will only sound four
times when you arm and four times when the exit delay expires.
Disarm One beep.
Chime Two beeps.
Special chime Three beeps.
Trouble beeps Six beeps every minute. Press Status to stop beeps for 4 hours.
No activity beeps* Twenty beeps every minute for 5 minutes (feature must be
programmed by the installer).
* This feature is not verified for use by UL.
Alarm sirens and lamp modules
Exterior and interior sirens make three different alarm sounds on the premises,
each indicating a different type of alarm. Sirens are programmed by the installer
to time out and stop sounding after a specified time.
Use Table 9 on page 20 to understand the siren sounds used by the security
system.