Interlogix Simon XT User Manual - Manual (Page 24)

18 Simon XT User Manual
If your installer programmed your system for remote touchpad arming, you must
enter your home to start the entry delay before you can use your keyfob to
disarm the system.
Note: Panic alarms need to be silenced from the panel, a remote handheld
touchpad, or another keyfob. They cannot be silenced from the same keyfob that
activated the alarm.
Table 7: Key fob button operation
Task Instructions
Arm doors and windows. Press the Lock button once.
Arm doors, windows, and motion sensors. Press the Lock button twice.
Arm doors, windows, and motion sensors, and
to activate the latchkey option. Press the Lock button three times.
Send a panic (intrusion, silent, or nonmedical
emergency) alarm to the central monitoring
station. Press the Lock and Unlock buttons
simultaneously for 3 seconds.
(Check with your installer to find out how the
key fob panic buttons will operate.)
Can be programmed to control a device
connected to a universal module. Press the Star button once.
Can be programmed to control a device
connected to a lamp module. Press once to turn
on all lights on lamp module. Press again to
turn off all lights on lamp module turn off. Press the Light button once.
Disarm your security system Press the Unlock button once.