Interlogix Simon XT User Manual - Manual (Page 43)

Simon XT User Manual 37
System download
You can initiate a download call to program your system with the settings
specified by your installer.
To initiate a download, do the following:
1. Scroll up/down till the display shows System tests.
2. Press Enter. The display shows Enter code.
3. Enter your master code with numeric keys.
4. Press Enter. The display now shows Sensor test.
5. Scroll up/down till the display shows System download.
6. Press Enter. The display shows Download in progress.
7. Wait while your system calls the download center.
8. Display will show the result of the download. If the display shows Download
Fail, contact your dealer.
9. Press STATUS twice to exit.
Note: Use this feature only when instructed by your installer or dealer.