Interlogix Simon XT User Manual - Manual (Page 30)

24 Simon XT User Manual
navigating to an option selects that option for editing and flashes the current
value. Pressing OK after navigating to a submenu enters that submenu, making
a new list of options accessible. Pressing Status exits a menu and goes to the
next higher level. When accessing the System Programming or System Tests
menu, the panel prompts you to enter an access code. To continue, enter your
master code, and then press OK.
To program an option, first navigate to that option until it is displayed, and then
press OK. The option value will start flashing, indicating that it is ready to be
changed. Use the scroll keys or enter a numerical value to change the option,
and then press OK.
Table 12: Menu structure
Set Clock (system time)
Set Date
Chime
Special Chime
System Tests Sensor Test
Communication Test
System Download
System Programming Access Codes Dealer Code
Master Code
User Codes 1 to 8
Duress Code
Security Downloader Enable
Phone Numbers Phone Number 4
Timers Latchkey Time
Siren Options Panel Piezo Beeps
Panel Voice
Panel Piezo Alarms
Status Beep Volume
Speaker Volume
System Tests Sensor Test
Communication Test
Initiate Download Call
Revision
Contrast