Code Alarm SRT 9000 - Manual (Page 12)

12
Name of Channel Setting
The 2-way transmitter’s AUX output names can be modified to reflect the accessory in which it controls, such as
window automation or garage door control. To edit the AUX output name, scroll to menu 5, then use the
corresponding transmitter buttons to make your selections.
Settings for the 2-Way Transmitter, continued
Language Setting
To change the 2-way transmitters display text between English, Spanish or French, scroll to menu 6, then use the
corresponding transmitter buttons to make your selections.
Set to Defaults
To set the 2-way transmitter back to the factory default settings, scroll to menu 6, then use the corresponding
transmitter buttons to make your selections.
Reseting the 2-Way Transmitter
In some situations it may be necessary to reset the transmitter, to do so, press and release the reset button shown
on page 4 of this manual. After resetting the transmitter it may be necessary to re-sync the transmitter with the
vehicle, do this by pressing the lock button several times until the transmitter or vehicle responds.