Code Alarm SRT 9000 - Manual (Page 14)

14
Attempted Intrusion Identification
This system will inform you if an intrusion attempt has occurred while you were away from the vehicle. If an
intrusion attempt occurred, the system will sound 4 times and the parking lights will flash 3 times when disarming
the system. Enter the vehicle an observe the dash mounted status LED to Identify which zone was triggered. The
2-way transmitter will also display the intrusion identification when the system is disarmed.
1. Zone 1 Hood - 1 flash, pause 1 flash, etc.
2. Zone 2 Trunk - 2 flashes, pause 2 flashes, etc.
3. Zone 3 Door - 3 flashes, pause 3 flashes, etc.
4. Zone 4 Shock Sensor - 4 flashes, pause 4 flashes, etc.
5. Zone 5 Ignition - 5 flashes, pause 5 flashes, etc.
6. Zone 6 Optional Sensor - 6 flashes, pause 6 flashes, etc.
The intrusion warning indicators are stored in the system’s memory and will be erased when the ignition key is
turned on.
Disarming the Security System
To disarm the system press the UNLOCK button. The system will sound and the parking
lights will flash 2 times, and the doors will unlock (if equipped and connected). To disarm
the system silently, press and hold the UNLOCK button for 2 seconds. The parking lights
will flash, indicating the system is disarmed and has unlocked the doors (if equipped and
connected).
Automatic Rearm: If this feature is selected in programming, the system will rearm automatically 60 seconds
after disarming unless a door is opened.
Using Your Remote Control, continued
Two Stage Door Unlock (Optional)
If this feature is enabled on your system, pressing the UNLOCK button one time on the remote control will unlock
only the driver’s door. Press UNLOCK again to unlock the remaining doors.
Activating the Trunk Release Feature (Optional)
If this feature is enabled on your system, pressing and holding the TRUNK button on the remote control for 2
seconds will open the vehicle’s trunk or hatch.