Alarm inputs and outputs – Interlogix TruVision IP Megapixel PTZ Configuration Manual User Manual
Page 39
Advertising
2BChapter 3: Camera configuration
TruVision IP PTZ Camera Configuration Manual
35
To define exception alarms:
1. In the
Events
folder (1), click the
Exception
tab (2) to open its window.
2. Under
Notification Type
(3), select one of the exception alarms from the
drop-down list.
3. Check the checkbox to select the linkage method (4): Notify alarm host, send
email, or trigger alarm output. If “Trigger alarm output” is selected, check
which type is required: Select all, A->1, or A>2.
4. Repeat steps 2 and 3 for each of the exception alarms to be configured.
5. Click
Save
(5) to save changes.
Alarm inputs and outputs
To define an external alarm input:
1. In the
Events
folder (1), click the
Alarm Input
tab (2) to open its window.
Advertising