Interlogix TruVision IP Megapixel PTZ Configuration Manual - Manual (Page 44)

2BChapter 3: Camera configuration
40 TruVision IP PTZ Camera Configuration Manual
2. Enter the IP address of the network disk, (3) and the NAS folder path.
3. Click Save (4) to save changes.
Format storage devices
Use the storage management window to display the capacity, free space
available, and the working status of the HDD of the NAS and the SD card in the
camera. You can also format these storage devices.
Before formatting the storage device, stop all recording. Once formatting is
completed, reboot the camera as otherwise the device will not function properly.
If Overwrite is enabled, the oldest files are overwritten when the storage
becomes full.
To format the storage devices:
1. In the Storage folder (1), click the Storage Management tab (2) to open its
window.
2. Check the HDD Number column to select the storage.
3. Click Format . A window appears to check your formatting permission.