Interlogix TruVision IP Megapixel PTZ Configuration Manual User Manual
Page 40
Advertising
2BChapter 3: Camera configuration
36
TruVision IP PTZ Camera Configuration Manual
2. Choose the
Alarm Input No.
and the
Alarm Type
(3). The alarm type can be
NO (Normally Open) or NC (Normally Closed). Enter a name for the alarm
input.
3. Click
Edit
(4) to set the arming schedule for the alarm input. See “Motion
detection alarms” on page 31 for more information.
4. Check the checkbox to select the linkage method.
5. Click
Save
to save changes.
To define an alarm output:
1. In the
Events
folder (1), click the
Alarm Output (2)
tab to open its window.
Advertising