Interlogix Topaz User Manual - Manual (Page 150)

Topaz
User Manual
132
Capabilities Report
The Setup Capabilities Report provides detailed information as to the maximum capabilities that
are configured on your system. For example, how many card readers you can address, the number
of cardholders you may add, optional programs supported by your system. At the bottom, the report
will show how much space is left in your Topaz archive file.
To navigate to the Setup Capabilities Report page, click the Report button in the main navigation
bar at the left side of the browser window, then click the button next to System Setup on the main
Reports page then click the Capabilities tab button at the top of the window. You can also click the
System Setup – Capabilities tab at the top of the window from any reports page.
Figure 104.System Setup: Capabilities
The Capabilities page contains the following information:
System Capabilities The System Capabilities report recalls the maximum capabilities configured on your system.
Display Report
This is the default. Click to display on the Workstation monitor.
Print Report Click to send to the report printer.
Output To File Click to save the report into the file name specified in the Output File Name field. This saves the
report results in a file for later use outside of Topaz.
Output File Name If you selected Output to File, enter the name of the file to contain the report information. The Output
File Name can have up to 64 characters. For example, you can type “Myreport” and the report is
saved into the file named Myreport in the directory where Topaz was installed. You may enter a path
with the file name, for example, “c:\reports\Myreport”. The format of the report files is always plain
text that can be opened in Notepad.
Run Report Click to send the report to the destination specified (display, printer, or file). A message “Report
Completed” displays, with the number of records printed. Click OK to continue.