Interlogix Topaz User Manual - Manual (Page 263)

Chapter 9
Hardware
245
Alarm Point
The Alarm Point page is used to add, modify, or delete existing alarm points. The Alarm Point page
has two sub-pages, “Setup” and “Options”. They are used to configure more specific information for
the alarm point.
• Alarm Point Setup on page 245
• Alarm Point Options Page on page 248
Alarm Point Setup
To navigate to the Alarm Point page within the Hardware pages, click the Alarm Point tab button at
the top of the window, or from the main Hardware screen click the Alarm Point button on the right
side of the screen. The following page displays.
Figure 174.Alarm Point: Setup