How to add a workstation, How to modify a workstation, How to delete a workstation – Interlogix Topaz User Manual User Manual
Page 224
Topaz
User Manual
206
How to add a workstation
To add a workstation, you should first install the Topaz software on the new workstation’s computer.
When that workstation logs on with the software for the first time, the server creates a new record for
that workstation under the Workstation Name field and the Internet (TCP/IP) Address. The values
for all fields on the workstation screen are the default values. See
If you add a new workstation from the server, it does not become effective until the Topaz software is
installed on that workstation and the software is started from that workstation. We recommend that
you first install the software on the workstation, and then make any changes you want to the
workstation screen for added functionality, for example, the use of Photo Badging.
How to modify a workstation
After the software is installed on a workstation and you run the Topaz software (which connects the
workstation to the server), you can make changes to any workstation, including the one being used.
This means you can set the functionality for a workstation from that workstation, as long as you have
the proper user permission level.
1. You can select the information for any workstation by selecting its name from the right side of
the screen under Workstation. This displays on the screen the information for that
workstation.
2. Make the necessary changes.
3. Click Save. The message “Operation Complete” displays.
How to delete a workstation
To permanently delete a workstation from the system, you must:
1. Delete the Topaz software from the workstation computer.
2. On the server, under Hardware, Workstation, select that workstation by name.
3. Click Delete.
4. A message “Are you sure you want to delete this record?” displays. Click OK to continue.
The workstation name is deleted from the list and the message “Operation Complete”
displays.