ClearSounds A300 - Manual (Page 12)

12 – ENGLISH
█ INSTALLATION STEPS
Installation of your ClearSounds
® A300
DECT 6.0 Cordless
Phone with Sound Boost
is easy. There are some basic steps
you need to take when you set-up your phone for the first
time.
If, at any time, you have questions about your phone after
reading this manual, please contact the ClearSounds ®
Customer Service Department at 1-800-965-9043.
1. PARTS CHECKLIST
Check the contents of the box - The A300 should contain:
Phone base Cordless Handset Batteries Phone Line Cords
AC Adapter Carrying Clip User Manual
2. PHONE INSTALLATION
The phone should be located in an area where it is easy to see
the visual display and lighted ringer. Choose an area near a
phone wall jack (RJ11C) and power outlet. The phone may be
placed on a shelf or table or may be fixed to the wall. To avoid
potential interference, the phone should not be located near
electronic equipment, such as personal computers, television
or microwave ovens.
Begin by removing the clear plastic Caller ID protective tab.
This film tab is only for display and to protect your Caller ID
display during shipping.