ClearSounds A300 - Manual (Page 19)

19 – ENGLISH
To adjust the volume, press up or down on the
navigation key. You may also pre-select your speakerphone
volume by following the instructions in Audio Setup, found
on page 29.
For optimal speakerphone performance, avoid the following:
• Areas with high background noise (The microphone might
pick up these sounds and prevent the speakerphone from
going into the receiving mode when you finish talking).
• Surfaces affected by vibration.
• Recessed areas such as in a corner, under a cupboard, or
next to a cabinet, which can generate an echo effect.
█ Ringer Setting
Audible Ringer
You can adjust the ringer of your phone as high as +85 dB
and you can select separate ring tones for external calls (EXT)
received through the phone network (outside calls) and internal
calls (INT) received from other A300 handsets registered to
the base.
1. Press the Menu soft key to display the main menu list.
2. Press up
or down to scroll to HS Settings and
then press the Select soft key.
3. Press down to scroll to Ring Setup and then press
the Select soft key.
4. Press the Select soft key to select INT Ring or press
down to select EXT Ring, and then press the Select
soft key.
5. Press up or down to select Melody or Volume
and then press the Select soft key. You can select the
ring tone from Melody 1-Melody 10 and adjust the
volume from Volume 1-Volume 5, or Off. When adjusting
the Melody or Volume, the handset plays the selected
melody/loudness.
6. Press the Save soft key to confirm.
7. Press the Back soft key to return to the previous menu
and select INT Ring or Ext Ring to repeat the process.