ClearSounds A300 - Manual (Page 24)

24 – ENGLISH
1. Press the Menu soft key to display the main menu list.
2. Press up
or down to scroll to BS Settings and
then press the Select soft key.
3. Press down to scroll to Flash Time and then press
the Select soft key.
4. The display shows the current setting. Press up or
down to select Flash-1 or Flash-2 and then press
the Save soft key.
If you subscribe to Call Waiting service from your local phone
provider, during a phone call you will hear a beep to indicate
another call is waiting on the line.
1. To connect to the waiting call, press the Flash soft key,
and your original call is put on hold and the display will
show R.
2. To switch between the two calls, press the Flash soft
key.
NOTE:
If you subscribe to Call Waiting on Caller ID, you will
receive Caller ID information (if available) on Call Waiting
calls (see page 37).
█ Modify PIN (Personal Identification Number)
Your phone is equipped with a PIN, which is used when re-
setting the base or handset to factory default settings. The
default PIN is 0000. We suggest that you do not change the
PIN from 0000
, but if you need to change the PIN:
1. Press the Menu soft key to display the main menu list.
2. Press up
or down to scroll to BS Settings and
then press the Select soft key.
3. Press up or down to scroll to Modify PIN and
then press the Select soft key.
4. The display shows “PIN ?”. Enter the current PIN, then
press the Next soft key. If the old PIN is validated, you
will be prompted to enter a new PIN. If the old PIN is