ClearSounds A300 - Manual (Page 44)

44 – ENGLISH
5. The announcement will be played back immediately. If
you do not like your message, record your announcement
again or restore it to the default one.
Sample Outgoing Announcement1
Hi, this is (use your name here), I can’t answer the phone
right now so please leave your name, number and a brief
message after the tone and I’ll get back to you. Thank
you.
Play Announcement
1. Press the TAM soft key to display the TAM main menu
list.
2. Press the Select soft key to select Announce.
3. Press the Select soft key to select Announce1 or press
down to select Announce2 and then press the Select
soft key.
4. Press the Select soft key to choose Playback.
5. The current announcement will play. During the playback,
you can press the Back soft key to stop and exit.
Restore Default Announcement(s)
1. Press the TAM soft key to display the TAM main menu
list.
2. Press the Select soft key to select Announce.
3. Press the Select soft key to select Announce1 or press
down to select Announce2 and then press the Select
soft key.
4. Press up or down to select Default and then
press the Select soft key.
5. The LCD will show “Confirm ?”. Press the Select soft
key to restore the default announcement or press the
Back
soft key to cancel.
6. Repeat for the other Announcement if necessary.