Overview of your equipment, Your tv/vcr combination's front panel – Curtis Mathes CMC 19101 User Manual
Page 10
4
Chapter 1 : Overview of Your Equipment
C H A P T E R
1
Overview of Your Equipment
Your TV/VCR Combination’s comes with a remote control. The section below summarizes
the buttons, controls, and terminals that you will use with your TV/VCR Combination.
Your TV/VCR Combination's Front Panel
Below you will find short description of the buttons and indicators on the front panel. These
are used for the following functions:
1
VIDEO in jack
Use this jack to receive a video signal from another A/V component.
2
AUDIO in jack
Use this jack to receive a audio signal from another A/V component.
3
EAR PHONE jack
Use this jack to the earphone (not supplied). The sound from the speaker is turned off.
4
Remote control receiver
This receiver receives a signal from your remote control. Do not block it.
5
STAND-BY(red) indicator
This indicator lights up when the power is off.
6
REC (red/green) indicator
This indicator lights up red when recording and lights up green when timer program oper-
ating.
7
REC button
Press this button to begin recording. Press repeatedly to set a recording time using
One-Touch Recording (OTR).
8
REW button
Press this button to rewind the tape.
9
PLAY button
Press this button to begin normal playback of the tape
10 FF button (Fast Forward)
Press this button to fast forward the tape.
VIDEO AUDIO
REC
1 2
3
4
6
5
7
8
9
10
11
12
13
12
13
14
POWER
STAND-BY REC
EAR PHONE
REW PLAY FF
STOP/EJECT
VOL CH