Displaying the tape counter, Time counter remaining tape time counter – Curtis Mathes CMC 19101 User Manual
Page 44
38
Chapter 7 : Additional VCR Features
Displaying the Tape Counter
Press the RECALL button to display the tape counter. The tape counter shows the tape travel
time in hours, minutes and seconds during recording or playback. Each time you press the
RECALL button, the time counter and the remaining tape time counter appears alternately.
When you use a tape shorter than 120 minutes, set Tape Remain to T120. When you use a
tape longer than 120 minutes, set Tape Remain to Others.
1.
Press the MENU button until “Tape” menu is displayed.
2.
The “Tape Remain” item will be selected.
Press the VOLB button to select “T120” or “Others”.
3.
Press the MENU button until OSD menu disappears.
12:08 PM
Channel 10
SP 0:30:00
Stop
12:08 PM
Channel 10
SP REM 01:30
Stop
Select
Tape
Tape Remain : T120
Repeat Play : Off
Rental Tape : Off
Zero Stop
Adjust
Next
1
Select
Tape Remain : Others
Repeat Play : Off
Rental Tape : Off
Zero Stop
Adjust
Next
2
3
Tape
Time counter
Remaining tape time counter