Curtis Mathes CMC 19101 - Manual (Page 14)

8 Chapter 1 : Overview of Your Equipment
Installing Your Remote Control Batteries
1 Open the battery compartment on the back of the remote control.
2 Install two AAA-size batteries (not included) as shown. Make sure the “+” and “-” termi-
nals are oriented correctly.
3 Replace the cover.
Notes
Do not mix different types of batteries, or mix an old and a new battery.
Remove and replace weak batteries. Weak batteries can leak and damage your controller.
Dispose of batteries properly; never throw them into a fire.
Point your remote at the receiver on the center of the front of the TV/VCR Combination.
Make sure the receiver is not blocked.
The remote control can operate up to 30 feet away from the TV/VCR Combination, if you are
directly facing the front of the TV/VCR Combination. Operating distance diminishes as you
move to the sides of the TV/VCR Combination.