Duplicating a video tape – Curtis Mathes CMC 19101 User Manual
Page 47
41
Chapter 7 : Additional VCR Features
Duplicating a Video Tape
Because your TV/VCR Combination has audio and video inputs, it is easy to make a copy of a
tape, if you have another VCR or Video Camera. Follow these instructions :
1.
Connect a audio cable from the AUDIO OUT jack on the VCR to the AUDIO jack on the
front of your TV/VCR Combination.
2.
Connect a video cable from the VIDEO OUT jack on the VCR to the VIDEO jack on the
front of your TV/VCR Combination.
3.
Press TV/LINE button on the remote control to set the TV/VCR Combination to “LINE”.
4.
Insert the tape on which you want to record in the TV/VCR Combination and set it to the
point at which you want to begin recording.
5.
Insert the tape from which you want to record in the VCR and set it to the point at which
you want to begin recording.
6.
Press the REC/OTR button on the TV/VCR Combination.
7.
Press the PLAY button on the VCR.
8.
When you are finished recording, press the STOP button on both the TV/VCR
Combination and the VCR.
VIDEO
AUDIO
AUDIO
HERPH
ONE
VIDEO
STAND-BY
REC
REC
REW
PLAY
FF
ST/EJ
VOL
CH
POWER
OUT
OUT