Curtis Mathes CMC 19101 - Manual (Page 49)

43 Maintenance and Specifications
Servicing
Should your TV/VCR Combination stop working, do not try to repair it yourself. There are no
user-serviceable parts inside the unit. Turn the TV/VCR Combination off, unplug the power
cord, and take the unit to an authorized CurtisMathes repair center.
Cabinet Cleaning
To clean your TV/VCR Combination, wipe it with a soft cloth that has been dampened with
luke-warm water and wrung dry. Never use a solvent or alcohol. Never spray insecticides near
your TV/VCR Combination; such chemicals can cause damage and discoloration to the exteri-
or of your TV/VCR Combination.
Video Head Cleaning
If the picture is blurred or interrupted when palying back a tape, it may be caused by dirty
video heads. Video heads can become dirty after long periods of playback, or from repeated
use of rental tepes. To have your video heads cleaned, contact an authorized CurtisMathes
repair center.
Specifications
Power Supply AC 120V, 60Hz
Power Consumption 60W
Dimensions (WxHxD) 382 x 404 x 365mm
Weight 14Kg
Channel Coverage VHF : 2-13, CATV : 1, 14-125 ; UHF : 14-69
Video Signal System NTSC Color
Picture Tube 19” diagonal
Antenna Input VHF/UHF 75ohm, one input
VCR Format VHS Standard
Tape Speed SP : 33.35mm/sec ; LP : 16.67mm/sec ; EP :
11.12mm/sec
Playback Time SP : 120min ; LP:240min; EP:360min
(T-120 tape)
Speaker Output 8 Ohm, 1.3W
Video Input 1.0Vpp, 75 Ohm
Audio Input 3.8dBm, over 100K Ohm
Temperature 5˚C to 40˚C
Humidity Less than 85%
Timer Programming 6 Event / 1 Month
Tuning System Frequency Synthesized Tuning
Design and specifications are subject to changes without notice or legal obligaiton.
MAINTENANCE AND SPECIFICATIONS